2 bottom moldboard plow

[ym2210_jgm]

Can the YM2210 pull a 2 bottom? I have access to a Deere 415 2 - 14" bottom but think it too much for my YM2210? have front loader and some weights 3-400 lbs is all
Everything Attachments sells a 14" 2 Bottom Plow they say "This plow was designed to be used on tractors with 45 HP or less"


1 bottom are hard to find here or too expensive. I can buy 2 or 3 old 2 bottoms

Thanks,
Jim

[winston]

Assuming you are two wheel drive my answer would be no. I had a 4-wheel drive 2002D and did use one. It was all it could do but did ok with it. It would not pull it without front wheel drive. You have the needed power but if no 4-wheel drive you can't do it.

[Bennyhill]

He couldn't do it with filling the tires??
I had a 1401 and could barely pull my disk, with the deep cut japan tires.

[Bennyhill]

Filling the tires wouldn't help?
And or can you take one/1 blade off?
I e seen a 1601 pull one with taking one blade off and turf tires with chains..

[winston]

Disk and turning plow are two different implements. I stick with saying a two wheel drive 2210 can't pull a two bottom turning plow with any efficiency. I'm sure you might pull it without going to the normal depth but not when sinking it on down.

[ym2210_jgm]

Thanks for replies, I got a tiller and going to use it, got a 10-156 2 btm with it and going to be sort of yard art